Lalvin EC-1118 Champagne
Lalvin EC-1118 is the original ‘prise de mousse’.
แชมเปญยีสต์ยอดนิยมที่สุดในโลก ณ ปัจจุบัน เป็นสายพันธุ์ที่แยกจากยีสต์ในเมืองแชมเปญ สามารถหมักที่อุณหภูมิต่ำได้ ตกตะกอนได้ดี ทนระดับแอลกอฮอร์ได้ดี ทำให้ EC-1118 เป็นสายพันธุ์ที่ถูกนำไปใช้อย่างแพร่หลาย เช่น Sparkling wines ไวน์ผลไม้ รวมถึง Cider
It was isolated in Champagne and its use is validated by the Comité Interprofessionnel du Vin de Champagne (CIVC).
Its strong competitive character, its ability to ferment at low temperature, good flocculation and excellent alcohol tolerance, make Lalvin EC-1118 an excellent strain to be used in a wide range of applications (such as sparkling wines, fruit wines and ciders).
Robust, Reliable, and Neutral. Useful for a wide range of applications, including wine and fruit cider fermentations. A yeast selected in the famous sparkling wine region for its excellent properties in producing sparkling base wine as well as“in-bottle” secondary fermentation.
Lalvin EC 1118® is known for its robust and reliable fermentation kinetics. Its sensory contribution is considered neutral, as it gives very little yeast sensory contribution to the wine. It is used extensively in the world for the production of both white and red wines.
MICROBIOLOGICAL AND OENOLOGICAL PROPERTIES
- Recommended for white, rose, and red wine production.
- Highly recommended for secondary fermentation.
- Saccharomyces cerevisiae var. bayanus
- Desirable fermentation temperature: 10-30°C. (50-86°F)
- Alcohol tolerance 18% v/v *subject to fermentation conditions.
- Low relative nitrogen demand (under controlled laboratory conditions)
- Short lag phase and high fermentation vigour. Cooling may be required to control this high vigour.
- Very low production of H2S under low YAN conditions
- Low production of SO2 binding compounds.
- Moderate relative potential for SO2 production (can produce high levels of SO2 under low nutrient conditions, up to 50mg/L).
- Competitive factor active.
- Low foam producer.
Lalvin EC-1118 Dosage: 25g/hL (2lb/1000gal) of Active Dried Yeast (this will provide an initial cell population of approximately 5 x106 viable cells/mL)
How to use Lalvin EC-1118 Champagne yeast
- Add 300g (10.6oz) of Go-Ferm Protect Evolution™ to 6L (1.5gal) of 40-43°C (104-110°F) clean, chlorine-free water. Stir until a homogenous suspension free of lumps is achieved.
- When the temperature of this suspension is between 35-40°C (95-104°F), sprinkle 250g (8.8oz) of yeast slowly and evenly onto the surface of the water, whilst gently stirring. Ensure any clumps are dispersed.
- Allow standing for 20 minutes before further gently mixing.
- Mix the rehydrated yeast with a little juice, gradually adjusting the yeast suspension temperature to within 5-10°C (9-18°F) of the juice/must temperature.
- Inoculate into the must.
Notes:
- Steps 1-5 should be completed within 30 minutes.
- It is best to limit the first juice/must volume addition to one-tenth of the yeast suspension volume and wait 10 minutes before the addition to juice.
- To minimize cold shock, ensure temperature changes are less than 10°C (18°F).
- It is recommended that juice / must be inoculated no lower than 18°C (64°F).
- It is recommended to use complex nutrition source such as Fermaid®
More information: Lalvin EC-1118 Champagne
Alternative Champagne Yeast: Red Star Pasteur Champagne (Premier Blanc)
| Weight | 12 g |
|---|
Brand
Lalvin
Some of the world’s best winemakers trust Lalvin dry yeast to bring out the best in their wines. Through a specialized manufacturing process, Lalvin yeast is brought to peak condition for use in winemaking applications, then quickly stabilized by removing most of the moisture content. This allows Lalvin dry yeast to stay active through storage until it is rehydrated and pitched, ready to start the fermentation process.
Related Products
฿55.00
Out of stock
Out of stock
฿2,890.00
Reviews
There are no reviews yet.