Heavy Duty Silicone Tube ID 1/2 – Food Grade (6m roll)

สายยาง Silicone อย่างดี เกรดอาหาร แบบทนทานพิเศษ เหมาะกับการใช้งานในระบบ Homebrewery

เส้นผ่านศูนย์กลางในสาย 12.5mm

เส้นผ่านศูนย์กลางนอกสาย 18.5mm

Ideally suited to setting up a brewery.

This 1/2inch hose size is commonly used for breweries up to 200L in size.

Compatible with the BrewZilla units and various other fittings such as camlock fittings and 1/2inch nipple/barbs

Heavy Duty Silicone Tube – 6m Roll (12.5mm ID x 18.5mm OD)

This silicone hose is resistant to constant high temperatures (over 200C) and has good chemical resistance.

The soft silicone is easy to work with and seals very well.
The soft silicone is great for transferring beer from fermenter to keg and will fit onto the standard fermenter tap or standard 13mm hose barbs.
It is also recommended for handling spirits and for distillation applications as it does not leach plasticisers like vinyl tubing.
Internal diameter is 12.5mm and outside diameter of 18.5mm.

Note: This hose should not be used for higher pressures above 20psi (such as mains water pressure). The hose has a burst pressure of approximately 35psi.
Clamps suitable for this hose being attached to a 13mm barb are the: